Easy Way to Make a Bike Stand
If you lot have kids and your kids have bikes… you have a mess, correct? That'due south been true for us whether they were in the garage, or (as they are at present) under our dorsum deck. The common denominator? My kids.
I like to say you gotta have the right tool for the job, which means my kids need the right tool to shop their bikes. That'due south why I built a super simple (and hopefully really constructive) DIY Bike Stand for each of them. Fingers crossed.
This post is sponsored by The Home Depot.
Earlier we get started, brand sure to follow me on YouTube, Facebook and Instagram to proceed upwardly with all my latest builds!
Here is what you'll need for the project:
Affiliate links are used on this page. Encounter my disclosure folio for info on affiliate programs.
Are you wondering why my kids are storing their bikes under our deck? It's because I enclosed the sides of my deck to create more storage space well-nigh two months ago. There are doors that open, pavers for them to easily roll their bikes on, and a designated area for their bikes. Information technology looks cracking when the doors are closed, as y'all can see.
But reality hits when you lot open up the door. The bikes are toppled over, pedals are stuck in wheels and it'south generally just a mess. Honestly, it's not actually my child's fault either. The ground isn't level because it slopes abroad from our house. Their kickstands are not going to continue these bikes upright.
This has lead to two things happening; i of my children leaves his cycle in the driveway ALL THE TIME and the others just quit riding their bikes altogether. Getting them out from under the deck is too much work.
Information technology was time for a solution, and that's when I decided to make easy DIY bike stands and hopefully fix the problem.
Cut Wood for Bike Stands
To build the bike stands I used fleck 2x4s I recently got for free. The forest wasn't in the all-time status, only with lumber prices these days I'll have all the free woods I can get.
For each DIY wheel stand up I used my Dewalt 20V Max vii-1/4 inch Cordless Circular Saw to cut two boards that were 22″ long and two more sections that were xviii″ long. When the saw is paired with the Flexvolt batteries it can accept up to 77% more ability, so you could turn through 2×4'southward all twenty-four hours long and tackle much bigger cuts. The brushless motor also spins at 5500 rpm to give you faster cuts. Needless to say it made curt work of this job.
Assemble Wheel Stands
After quickly measuring the width of the front end tires to get the spacing right, I was prepare to assemble. Knobby mount wheel tires flare out at the treads, and then endeavour and get a snug fit on these.
I turned the 22″ long boards on their sides and laid them on the work table. Then I put the xviii″ boards across them at the superlative and bottom. I'll flip this when I'm done, and then the bicycle's tire volition rest in the channel I'm making with the 22″ long boards.
One time I had everything lined up, and used my Dewalt20V MAX i/2 in. Cordless Hammer Drill/Driver to spiral everything together. The drill comes with a big 6Ah battery in the kit, and then you can utilise it on the circular saw which is available equally a tool just buy. This saves you some money and gets you a large bombardment to easily power both tools.
And if you demand to put the hammer drill to tough piece of work it's got a heavy duty 1/2 inch metallic chuck and a iii-speed transmission to fit different jobs.
If you want to go a pace further you could secure the DIY bicycle stand to the ground. Just drill a pigsty through the 18″ boards, and pound a pale through information technology into the ground.
With the cycle stands assembled, I flipped them correct side upwards put them on the ground and gave them a examination run.
They work great and make information technology easy for the kids to park their bikes and not have them fall over. But more importantly they are easy to have out of the storage are when they want to use them.
Once the DIY bike stands were done I put them in place nether the deck, and rolled all of the bikes into their new homes. No more falling bikes! I love a elementary solution.
Clean Upwards Work Area
The under deck storage is cracking for the bikes and I also put a paver edged garden bed around it which nosotros dear. Only our bermuda grass loves to attempt and grow into the garden bed. And so I got to try out the Dewalt 60V Max Cordless String Trimmer to clean things upwardly. That'south the beauty of the Dewalt Flexvolt batteries, they can run both 20V and 60V tools. I simply swapped out the battery over to the string trimmer and was ready to edge.
Existence able to switch batteries like that is a large do good of this system. Any time y'all can reduce another battery charger or buy one less bombardment it'll save you space and more importantly coin. The trimmer is merely 12.8 lbs so it's light to carry around and has a universal attachment system that you accepts other heads like a polesaw, blower, and hedge trimmer.
I've been working with Dewalt this year every bit part of the Home Depot ProSpective program. I was so thankful to receieve the Flexvolt Circular Saw, Flexvolt Hammer Drill and the Flexvolt String Trimmer then I could apply them on this project.
With everything cleaned up and the DIY bike stands in place the bikes are set to curl (I couldn't resist). Hither'southward hoping I've solved at least i problem for my kids!
If you lot liked this project check out my other Outdoor Projects.
The Dwelling Depot provided me with product and/or monetary compensation as a sponsor of this build. All opinions are my own and are non filtered past the sponsor.
Source: https://fixthisbuildthat.com/how-to-build-a-diy-bike-stand/
0 Response to "Easy Way to Make a Bike Stand"
Post a Comment